This store uses cookies and other technologies so that we can improve your experience on our sites. More information

close

Filter by

TYPE OF FORM
WIDE (b)
58 mm. 96 mm.
HEIGHT (L)
65 mm. 265 mm.
THREAD LENGTH (GL)
30 mm. 175 mm.
PRICE
18 33

Reference: M10LE4618

WAVE SPRING WASHER M10LE4618

WAVE SPRING WASHER M10LE4618

THICKNESS: 0.2
NUMBER OF WAVES: 3
FREE LENGTH: 2
OUTSIDE DIAMETER: 18.5
INSIDE DIAMETER: 13
SPRING RATE (K): 29
RAW MATERIAL: CK67
LOAD AT L1: 29
LOADED LENGTH: 1
Price €1.88
More

Reference: M01MCPF4794

Compression spring M01MCPF4794

Compression spring 

FREE LENGTH: 18
OUTSIDE DIAMETER: 4
INSIDE DIAMETER: 3.30
WIRE DIAMETER: 0.35
ACTIVE COILS: 9.39
TOTAL COILS: 11.39
SPRING RATE (K): 0.3
RAW MATERIAL: EN 10270-3 1.4310
ENDS: CLOSED NOT GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 4.34
Price €3.00
More

Reference: M01MC4350006

Muelle de compresion M01MC4350006

Muelle de compresion M01MC4350006

FREE LENGTH: 8
OUTSIDE DIAMETER: 7.1
INSIDE DIAMETER: 5.70
WIRE DIAMETER: 0.7
ACTIVE COILS: 4
TOTAL COILS: 6
SPRING RATE (K): 2.09
RAW MATERIAL: EN 10270-3 1.4310
ENDS: CLOSED NOT GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 4.34
Price €3.00
More

Reference: M02MCPF4814

copy of Extension spring M02MC20400001

Extension spring M02MC20400001

FREE LENGTH: 54
OUTSIDE DIAMETER: 8
WIRE DIAMETER: 1
ACTIVE COILS: 41
SPRING RATE (K): 0.724
RAW MATERIAL: EN 10270-1 SH
SURFACE COATING: NO PROTECTION
INITIAL TENSION: 4
LOAD LENGHT L1: 85
LOAD AT L1: 26.46
Price €3.00
More
All best sellers
U-BOLT FOR LEAF SPRINGS
U-BOLT FOR LEAF SPRINGS

U-BOLT FOR LEAF SPRINGS

FORM 1 FORM 3 FORM 5 FORM 7 FORM 8
ABARCON SPRINGMAKERS.ET FORMA 1 ABARCON SPRINGMAKERS.ET FORMA 5 ABARCON SPRINGMAKERS.ET FORMA 7 ABARCON SPRINGMAKERS.ET FORMA 8

U-bolts MABILSA 

  • When replacing a leaf spring, first fasten the spring to the fitting points on the body of the vehicle and then attach to the axle and fit the U-bolts.
  • It is very important to ensure that the Ubolts or spring clamps are properly tightened to the correct level of torque.
  • Our range of u-bolts has been designed to cover the majority of applications and are always supplied complete with nuts.
  • This range is of a universal style and suitable for standard or heavy duty leaf spring applications.
  • Many are longer than they need to be, so they should be cut to the correct length for the application during installation.
  • In the majority of applications, 2 u-bolts are required per leaf spring, i.e. 4 u-bolts per axle set. U-bolts should be re-checked for tightness a couple of weeks after fitting.
  • Incorrect tightening of u-bolts can cause premature failure og the leaf spring. We recommend that you follow a recognized repair manual to apply the correct torque.

FILE OF LEAF SPRINGS TO DOWNLOAD