This store uses cookies and other technologies so that we can improve your experience on our sites. More information

close

Filter by

OUTSIDE DIAMETER
5 70
INSIDE DIAMETER
2 31
HEIGHT
0 10
LOADED HEIGHT
0 8
LOAD IN NEWTONS
920 300000
THICKNESS
SCREW MEASURES
MAXIMUM SERVICE TEMPERATURE
SURFACE COATING
RAW MATERIAL
PRICE
0 21

Reference: M10LE4618

WAVE SPRING WASHER M10LE4618

WAVE SPRING WASHER M10LE4618

THICKNESS: 0.2
NUMBER OF WAVES: 3
FREE LENGTH: 2
OUTSIDE DIAMETER: 18.5
INSIDE DIAMETER: 13
SPRING RATE (K): 29
RAW MATERIAL: CK67
LOAD AT L1: 29
LOADED LENGTH: 1
Price €1.88
More

Reference: M01MCPF4794

Compression spring M01MCPF4794

Compression spring 

FREE LENGTH: 18
OUTSIDE DIAMETER: 4
INSIDE DIAMETER: 3.30
WIRE DIAMETER: 0.35
ACTIVE COILS: 9.39
TOTAL COILS: 11.39
SPRING RATE (K): 0.3
RAW MATERIAL: EN 10270-3 1.4310
ENDS: CLOSED NOT GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 4.34
Price €3.00
More

Reference: M01MC4350006

Muelle de compresion M01MC4350006

Muelle de compresion M01MC4350006

FREE LENGTH: 8
OUTSIDE DIAMETER: 7.1
INSIDE DIAMETER: 5.70
WIRE DIAMETER: 0.7
ACTIVE COILS: 4
TOTAL COILS: 6
SPRING RATE (K): 2.09
RAW MATERIAL: EN 10270-3 1.4310
ENDS: CLOSED NOT GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 4.34
Price €3.00
More

Reference: M02MCPF4814

copy of Extension spring M02MC20400001

Extension spring M02MC20400001

FREE LENGTH: 54
OUTSIDE DIAMETER: 8
WIRE DIAMETER: 1
ACTIVE COILS: 41
SPRING RATE (K): 0.724
RAW MATERIAL: EN 10270-1 SH
SURFACE COATING: NO PROTECTION
INITIAL TENSION: 4
LOAD LENGHT L1: 85
LOAD AT L1: 26.46
Price €3.00
More
All best sellers
TENSIONING WASHER DIN 6796
TENSIONING WASHER

TENSIONING WASHER DIN 6796

TENSIONING WASHER DIN 6796

  • Compliant with DIN 6796, our tensioning washers are robustly dimensioned and designed for use in medium or high load screw joints.
  • The high spring force affords effective protection against relaxation and creep when joints are exposed to high stresses and movements resulting from thermal expansion or contraction.
  • In such instances, tensioning washers replace conventional lock washers.
  • Tensioning washers can be stacked in series and/or parallel. 
  • Used like disc springs.
  • Series stacking increases the available deflection of the spring stack and parallel stacking increases the force.
  • The desired installation is as near flat as possible. Spring force as below. If required, untreated spring washers can also be supplied direct from the factory. Spring washers in custom sizes and special materials, e.g. stainless, acid proof, phosphor bronze or Nimonic 90, can be produced upon request. 

Reference: M18LE4664

TENSIONING WASHER DIN 6796 M18LE4664

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 0.4
OUTSIDE DIAMETER: 5
INSIDE DIAMETER: 2.2
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M2
HEIGHT: 0.6
LOADED HEIGHT: 0.5
LOAD IN NEWTONS: 920
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.20
More

Reference: M18LE4665

TENSIONING WASHER DIN 6796 M18LE4665

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 0.5
OUTSIDE DIAMETER: 6
INSIDE DIAMETER: 2.7
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M2.5
HEIGHT: 0.72
LOADED HEIGHT: 0.6
LOAD IN NEWTONS: 1540
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.12
More

Reference: M18LE4666

TENSIONING WASHER DIN 6796 M18LE4666

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 0.6
OUTSIDE DIAMETER: 7
INSIDE DIAMETER: 3.2
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M3
HEIGHT: 0.85
LOADED HEIGHT: 0.7
LOAD IN NEWTONS: 2350
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.12
More

Reference: M18LE4668

TENSIONING WASHER DIN 6796 M18LE4668

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 1
OUTSIDE DIAMETER: 9
INSIDE DIAMETER: 4.3
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M4
HEIGHT: 1.3
LOADED HEIGHT: 1.1
LOAD IN NEWTONS: 4400
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.20
More

Reference: M18LE4669

TENSIONING WASHER DIN 6796 M18LE4669

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 1.2
OUTSIDE DIAMETER: 11
INSIDE DIAMETER: 5.3
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M5
HEIGHT: 1.55
LOADED HEIGHT: 1.3
LOAD IN NEWTONS: 7200
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.30
More

Reference: M18LE4670

TENSIONING WASHER DIN 6796 M18LE4670

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 1.5
OUTSIDE DIAMETER: 14
INSIDE DIAMETER: 6.4
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M6
HEIGHT: 2
LOADED HEIGHT: 1.7
LOAD IN NEWTONS: 10200
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.50
More

Reference: M18LE4672

TENSIONING WASHER DIN 6796 M18LE4672

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 2
OUTSIDE DIAMETER: 18
INSIDE DIAMETER: 8.4
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M8
HEIGHT: 2.6
LOADED HEIGHT: 2.2
LOAD IN NEWTONS: 18600
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €0.94
More

Reference: M18LE4673

TENSIONING WASHER DIN 6796 M18LE4673

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 2.5
OUTSIDE DIAMETER: 23
INSIDE DIAMETER: 10.5
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M10
HEIGHT: 3.2
LOADED HEIGHT: 2.8
LOAD IN NEWTONS: 29600
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €1.06
More

Reference: M18LE4674

TENSIONING WASHER DIN 6796 M18LE4674

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 3
OUTSIDE DIAMETER: 29
INSIDE DIAMETER: 13
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M12
HEIGHT: 3.95
LOADED HEIGHT: 3.4
LOAD IN NEWTONS: 43000
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €1.82
More

Reference: M18LE4675

TENSIONING WASHER DIN 6796 M18LE4675

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 4
OUTSIDE DIAMETER: 39
INSIDE DIAMETER: 17
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M16
HEIGHT: 5.25
LOADED HEIGHT: 4.6
LOAD IN NEWTONS: 80900
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €3.84
More

Reference: M18LE4676

TENSIONING WASHER DIN 6796 M18LE4676

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 4.5
OUTSIDE DIAMETER: 42
INSIDE DIAMETER: 19
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M18
HEIGHT: 5.8
LOADED HEIGHT: 5.1
LOAD IN NEWTONS: 102000
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €5.52
More

Reference: M18LE4677

TENSIONING WASHER DIN 6796 M18LE4677

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 5
OUTSIDE DIAMETER: 45
INSIDE DIAMETER: 21
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M20
HEIGHT: 6.4
LOADED HEIGHT: 5.6
LOAD IN NEWTONS: 130000
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €3.70
More

Reference: M18LE4678

TENSIONING WASHER DIN 6796 M18LE4678

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 6
OUTSIDE DIAMETER: 56
INSIDE DIAMETER: 25
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M24
HEIGHT: 7.75
LOADED HEIGHT: 6.8
LOAD IN NEWTONS: 188000
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €11.70
More

Reference: M18LE4679

TENSIONING WASHER DIN 6796 M18LE4679

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 6.5
OUTSIDE DIAMETER: 60
INSIDE DIAMETER: 28
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M27
HEIGHT: 8.35
LOADED HEIGHT: 7.3
LOAD IN NEWTONS: 246000
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €17.22
More

Reference: M18LE4680

TENSIONING WASHER DIN 6796 M18LE4680

TENSIONING WASHER DIN 6796 RAW MATERIAL STEEL EN 10132-4. TEMPERATURE SERVICIE MAX. 120ºC.

THICKNESS: 7
OUTSIDE DIAMETER: 70
INSIDE DIAMETER: 31
RAW MATERIAL: ACERO EN 10132-4
SURFACE COATING: GALVANIZED + YELLOW CHROME
SCREW MEASURES: M30
HEIGHT: 9.2
LOADED HEIGHT: 8
LOAD IN NEWTONS: 300000
MAXIMUM SERVICE TEMPERATURE: 120ºC
Price €20.46
More

Reference: M18LES4668

TENSIONING WASHER DIN 6796 M18LES4668

TENSIONING WASHER DIN 6796 RAW MATERIAL STAINLESS STEEL EN 1.4568. TEMPERATURE SERVICE MAX. 350ºC.

THICKNESS: 1
OUTSIDE DIAMETER: 9
INSIDE DIAMETER: 4.3
RAW MATERIAL: ACERO INOXIDABLE EN 1.4568
SURFACE COATING: NO PROTECTION
SCREW MEASURES: M4
HEIGHT: 1.3
LOADED HEIGHT: 1.1
LOAD IN NEWTONS: 4400
MAXIMUM SERVICE TEMPERATURE: 350ºC
Price €4.90
More

Reference: M18LES4669

TENSIONING WASHER DIN 6796 M18LES4669

TENSIONING WASHER DIN 6796 RAW MATERIAL STAINLESS STEEL EN 1.4568. TEMPERATURE SERVICE MAX. 350ºC.

THICKNESS: 1.2
OUTSIDE DIAMETER: 11
INSIDE DIAMETER: 5.3
RAW MATERIAL: ACERO INOXIDABLE EN 1.4568
SURFACE COATING: NO PROTECTION
SCREW MEASURES: M5
HEIGHT: 1.55
LOADED HEIGHT: 1.3
LOAD IN NEWTONS: 7200
MAXIMUM SERVICE TEMPERATURE: 350ºC
Price €6.16
More

Reference: M18LES4670

TENSIONING WASHER DIN 6796 M18LES4670

TENSIONING WASHER DIN 6796 RAW MATERIAL STAINLESS STEEL EN 1.4568. TEMPERATURE SERVICE MAX. 350ºC.

THICKNESS: 1.5
OUTSIDE DIAMETER: 14
INSIDE DIAMETER: 6.4
RAW MATERIAL: ACERO INOXIDABLE EN 1.4568
SURFACE COATING: NO PROTECTION
SCREW MEASURES: M6
HEIGHT: 2
LOADED HEIGHT: 1.7
LOAD IN NEWTONS: 10200
MAXIMUM SERVICE TEMPERATURE: 350ºC
Price €7.68
More

Reference: M18LES4672

TENSIONING WASHER DIN 6796 M18LES4672

TENSIONING WASHER DIN 6796 RAW MATERIAL STAINLESS STEEL EN 1.4568. TEMPERATURE SERVICE MAX. 350ºC.

THICKNESS: 2
OUTSIDE DIAMETER: 18
INSIDE DIAMETER: 8.4
RAW MATERIAL: ACERO INOXIDABLE EN 1.4568
SURFACE COATING: NO PROTECTION
SCREW MEASURES: M8
HEIGHT: 2.6
LOADED HEIGHT: 2.2
LOAD IN NEWTONS: 18600
MAXIMUM SERVICE TEMPERATURE: 350ºC
Price €9.20
More

Reference: M18LES4673

TENSIONING WASHER DIN 6796 M18LES4673

TENSIONING WASHER DIN 6796 RAW MATERIAL STAINLESS STEEL EN 1.4568. TEMPERATURE SERVICE MAX. 350ºC.

THICKNESS: 2.5
OUTSIDE DIAMETER: 23
INSIDE DIAMETER: 10.5
RAW MATERIAL: ACERO INOXIDABLE EN 1.4568
SURFACE COATING: NO PROTECTION
SCREW MEASURES: M10
HEIGHT: 3.2
LOADED HEIGHT: 2.8
LOAD IN NEWTONS: 29600
MAXIMUM SERVICE TEMPERATURE: 350ºC
Price €10.44
More

Reference: M18LES4674

TENSIONING WASHER DIN 6796 M18LES4674

TENSIONING WASHER DIN 6796 RAW MATERIAL STAINLESS STEEL EN 1.4568. TEMPERATURE SERVICE MAX. 350ºC.

THICKNESS: 3
OUTSIDE DIAMETER: 29
INSIDE DIAMETER: 13
RAW MATERIAL: ACERO INOXIDABLE EN 1.4568
SURFACE COATING: NO PROTECTION
SCREW MEASURES: M12
HEIGHT: 3.95
LOADED HEIGHT: 3.1
LOAD IN NEWTONS: 43000
MAXIMUM SERVICE TEMPERATURE: 350ºC
Price €11.66
More