This store uses cookies and other technologies so that we can improve your experience on our sites. More information

close

Filter by

LENGHT (L)
9 mm. 27 mm.
THREAD
WIDE (b)
8 mm. 18 mm.
LENGTH TO DRILL CENTER (c)
4 mm. 14 mm.
THICKNESS (S)
0 mm. 1 mm.
CLIPPING THICKNESS (F)
0 mm. 4 mm.
TYPE OF FORM
FINISHED SURFACE
PRICE
0 6

Reference: M01MCPF4794

Compression spring M01MCPF4794

Compression spring 

FREE LENGTH: 18
OUTSIDE DIAMETER: 4
INSIDE DIAMETER: 3.30
WIRE DIAMETER: 0.35
ACTIVE COILS: 9.39
TOTAL COILS: 11.39
SPRING RATE (K): 0.3
RAW MATERIAL: EN 10270-3 1.4310
ENDS: CLOSED NOT GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 4.34
Price €3.00
More

Reference: M01LE2458

Compression spring M01LE2458

Compression spring M01LE2458

FREE LENGTH: 80
OUTSIDE DIAMETER: 10.25
INSIDE DIAMETER: 8
WIRE DIAMETER: 1
ACTIVE COILS: 22.25
TOTAL COILS: 24
SPRING RATE (K): 0.52
RAW MATERIAL: EN 10270-3 1.4310
ENDS: CLOSED & GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 24
Price €6.28
More

Reference: M01MC2220093

Muelle de compresion M01MC2220093

Muelle de compresion M01MC2220093

FREE LENGTH: 10
OUTSIDE DIAMETER: 5.8
INSIDE DIAMETER: 4.80
WIRE DIAMETER: 0.5
ACTIVE COILS: 7
TOTAL COILS: 9
SPRING RATE (K): 0.67
RAW MATERIAL: EN 10270-1 SH
ENDS: CLOSED NOT GROUND
SURFACE COATING: NO PROTECTION
SOLID LENGTH: 4.5
Price €3.00
More

Reference: M38MFPF2128

Lock lever spring M38MFPF2128

Lock lever spring M38MFPF2128

COIL WINDING DIRECTION: RIGHT HAND
OUTER LEG LENGTH (D): 18
OUTSIDE DIAMETER: 21.5
INSIDE DIAMETER: 18.50
WIRE DIAMETER: 1.5
SURFACE COATING: ZINC COATED
NUMBER OF COILS: 2.5
Price €1.20
More
All best sellers
SPRING NUTS
SPRING NUTS

SPRING NUTS

Reference: M31LE7541

SPRING NUT WITH THREAT M31LE7541

SPRING NUT WITH THREAT M31LE7541

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.6
LENGHT (L): 19.8
THREAD: M5
WIDE (b): 15
LENGTH TO DRILL CENTER (c): 9
CLIPPING THICKNESS (F): 0.8–4.3
TYPE OF FORM: 2
Price €1.98
More

Reference: M31LE7542

SPRING NUT WITH THREAT M31LE7542

SPRING NUT WITH THREAT M31LE7542

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.8
LENGHT (L): 22.8
THREAD: M6
WIDE (b): 16
LENGTH TO DRILL CENTER (c): 11
CLIPPING THICKNESS (F): 0.5–4.0
TYPE OF FORM: 2
Price €3.16
More

Reference: M31LE7543

SPRING NUT WITH THREAT M31LE7543

SPRING NUT WITH THREAT M31LE7543

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 1
LENGHT (L): 26.5
THREAD: M8
WIDE (b): 18
LENGTH TO DRILL CENTER (c): 13
CLIPPING THICKNESS (F): 0.8–4.0
TYPE OF FORM: 2
Price €5.28
More

Reference: M31LE7544

SPRING NUT WITH THREAT M31LE7544

SPRING NUT WITH THREAT M31LE7544

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 9.9
THREAD: ST2.9
WIDE (b): 8
LENGTH TO DRILL CENTER (c): 4.5
LENGTH TO DRILL CENTER (c): 4.6
DIAMETRO TALADRO (D): 5.5
GRUESO (E): 6
CLIPPING THICKNESS (F): 0.7–1.5
TYPE OF FORM: 1
Price €0.44
More

Reference: M31LE7545

SPRING NUT WITH THREAT M31LE7545

SPRING NUT WITH THREAT M31LE7545

FINISHED SURFACE: Fosfato y ligeramente aceitado
THICKNESS (S): 0.5
LENGHT (L): 12.5
THREAD: ST2.9
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6.8
GRUESO (E): 7.5
CLIPPING THICKNESS (F): 1.2–2.4
TYPE OF FORM: 1
Price €0.54
More

Reference: M31LE7546

SPRING NUT WITH THREAT M31LE7546

SPRING NUT WITH THREAT M31LE7546

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 13
THREAD: ST2.9
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 6
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6.8
GRUESO (E): 6.5
CLIPPING THICKNESS (F): 0.5–1.5
TYPE OF FORM: 1
Price €0.64
More

Reference: M31LE7547

SPRING NUT WITH THREAT M31LE7547

SPRING NUT WITH THREAT M31LE7547

FINISHED SURFACE: Fosfato y ligeramente aceitado
THICKNESS (S): 0.5
LENGHT (L): 15.5
THREAD: ST2.9
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 8
LENGTH TO DRILL CENTER (c): 6
DIAMETRO TALADRO (D): 7.2
GRUESO (E): 8.5
CLIPPING THICKNESS (F): 3.0–4.0
TYPE OF FORM: 1
Price €1.06
More

Reference: M31LE7548

SPRING NUT WITH THREAT M31LE7548

SPRING NUT WITH THREAT M31LE7548

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 9.3
THREAD: ST3.5
WIDE (b): 8
LENGTH TO DRILL CENTER (c): 4
LENGTH TO DRILL CENTER (c): 4.5
DIAMETRO TALADRO (D): 4
GRUESO (E): 6
CLIPPING THICKNESS (F): 1.2–1.6
TYPE OF FORM: 3
Price €1.20
More

Reference: M31LE7549

SPRING NUT WITH THREAT M31LE7549

SPRING NUT WITH THREAT M31LE7549

FINISHED SURFACE: ZINCADO
THICKNESS (S): 0.5
LENGHT (L): 10
THREAD: ST3.5
WIDE (b): 8
LENGTH TO DRILL CENTER (c): 4.2
LENGTH TO DRILL CENTER (c): 4.8
DIAMETRO TALADRO (D): 5.5
GRUESO (E): 6
CLIPPING THICKNESS (F): 0.9–1.2
TYPE OF FORM: 4
Price €0.78
More

Reference: M31LE7550

SPRING NUT WITH THREAT M31LE7550

SPRING NUT WITH THREAT M31LE7550

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 12.5
THREAD: ST3.5
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 6
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6.8
GRUESO (E): 7
CLIPPING THICKNESS (F): 2.0–2.7
TYPE OF FORM: 1
Price €0.60
More

Reference: M31LE7551

SPRING NUT WITH THREAT M31LE7551

SPRING NUT WITH THREAT M31LE7551

FINISHED SURFACE: Fosfato y ligeramente aceitado
THICKNESS (S): 0.5
LENGHT (L): 13
THREAD: ST3.5
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 6
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6.8
GRUESO (E): 7
CLIPPING THICKNESS (F): 0.5–1.5
TYPE OF FORM: 1
Price €0.48
More

Reference: M31LE7553

SPRING NUT WITH THREAT M31LE7553

SPRING NUT WITH THREAT M31LE7553

FINISHED SURFACE: ZINCADO
THICKNESS (S): 0.5
LENGHT (L): 9.6
THREAD: ST4.2
WIDE (b): 8
LENGTH TO DRILL CENTER (c): 4.2
LENGTH TO DRILL CENTER (c): 4.6
DIAMETRO TALADRO (D): 5
GRUESO (E): 6
CLIPPING THICKNESS (F): 1.5–1.9
TYPE OF FORM: 5
Price €0.44
More

Reference: M31LE7554

SPRING NUT WITH THREAT M31LE7554

SPRING NUT WITH THREAT M31LE7554

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 10
THREAD: ST4.2
WIDE (b): 8
LENGTH TO DRILL CENTER (c): 4.5
LENGTH TO DRILL CENTER (c): 4.6
DIAMETRO TALADRO (D): 5.5
GRUESO (E): 6
CLIPPING THICKNESS (F): 0.5–1.4
TYPE OF FORM: 1
Price €0.38
More

Reference: M31LE7555

SPRING NUT WITH THREAT M31LE7555

SPRING NUT WITH THREAT M31LE7555

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 12.7
THREAD: ST4.2
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6.8
GRUESO (E): 6.5
CLIPPING THICKNESS (F): 1.2–2.0
TYPE OF FORM: 1
Price €0.42
More

Reference: M31LE7556

SPRING NUT WITH THREAT M31LE7556

SPRING NUT WITH THREAT M31LE7556

FINISHED SURFACE: ZINCADO
THICKNESS (S): 0.5
LENGHT (L): 13
THREAD: ST4.2
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 6
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6.4
GRUESO (E): 6.5
CLIPPING THICKNESS (F): 2.5–3.0
TYPE OF FORM: 1
Price €0.48
More

Reference: M31LE7557

SPRING NUT WITH THREAT M31LE7557

SPRING NUT WITH THREAT M31LE7557

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 13
THREAD: ST4.2
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 6
LENGTH TO DRILL CENTER (c): 5.8
DIAMETRO TALADRO (D): 6
GRUESO (E): 6.5
CLIPPING THICKNESS (F): 0.5–1.5
TYPE OF FORM: 3
Price €0.48
More

Reference: M31LE7559

SPRING NUT WITH THREAT M31LE7559

SPRING NUT WITH THREAT M31LE7559

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 20.5
THREAD: ST4.2
WIDE (b): 15
LENGTH TO DRILL CENTER (c): 7.7
LENGTH TO DRILL CENTER (c): 12
DIAMETRO TALADRO (D): 7.2
GRUESO (E): 9
CLIPPING THICKNESS (F): 0.8–5.5
TYPE OF FORM: 6
Price €1.20
More

Reference: M31LE7560

SPRING NUT WITH THREAT M31LE7560

SPRING NUT WITH THREAT M31LE7560

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 22
THREAD: ST4.2
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 14
LENGTH TO DRILL CENTER (c): 7.5
DIAMETRO TALADRO (D): 7.2
GRUESO (E): 9
CLIPPING THICKNESS (F): 1.5–2.7
TYPE OF FORM: 1
Price €1.32
More

Reference: M31LE7561

SPRING NUT WITH THREAT M31LE7561

º

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.5
LENGHT (L): 22.5
THREAD: ST4.2
WIDE (b): 11.3
LENGTH TO DRILL CENTER (c): 14
LENGTH TO DRILL CENTER (c): 7.5
DIAMETRO TALADRO (D): 7.5
GRUESO (E): 12
CLIPPING THICKNESS (F): 0.7–1.3
TYPE OF FORM: 1
Price €1.06
More

Reference: M31LE7562

SPRING NUT WITH THREAT M31LE7562

SPRING NUT WITH THREAT M31LE7562

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.6
LENGHT (L): 16.6
THREAD: ST4.8
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 7.2
LENGTH TO DRILL CENTER (c): 7.9
DIAMETRO TALADRO (D): 7.2
GRUESO (E): 7.5
CLIPPING THICKNESS (F): 1.7–2.3
TYPE OF FORM: 1
Price €0.60
More

Reference: M31LE7563

SPRING NUT WITH THREAT M31LE7563

SPRING NUT WITH THREAT M31LE7563

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.7
LENGHT (L): 16.7
THREAD: ST4.8
WIDE (b): 11
LENGTH TO DRILL CENTER (c): 7.9
LENGTH TO DRILL CENTER (c): 7.5
DIAMETRO TALADRO (D): 7.2
GRUESO (E): 7.5
CLIPPING THICKNESS (F): 0.5–1.7
TYPE OF FORM: 1
Price €0.60
More

Reference: M31LE7564

SPRING NUT WITH THREAT M31LE7564

SPRING NUT WITH THREAT M31LE7564

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.7
LENGHT (L): 19
THREAD: ST4.8
WIDE (b): 16
LENGTH TO DRILL CENTER (c): 10.5
LENGTH TO DRILL CENTER (c): 7.3
DIAMETRO TALADRO (D): 8
GRUESO (E): 12
CLIPPING THICKNESS (F): 1.8–2.6
TYPE OF FORM: 1
Price €1.06
More

Reference: M31LE7565

SPRING NUT WITH THREAT M31LE7565

SPRING NUT WITH THREAT M31LE7565

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.7
LENGHT (L): 19.2
THREAD: ST4.8
WIDE (b): 16
LENGTH TO DRILL CENTER (c): 7.3
LENGTH TO DRILL CENTER (c): 11
DIAMETRO TALADRO (D): 6
GRUESO (E): 12
CLIPPING THICKNESS (F): 0.8–1.7
TYPE OF FORM: 3
Price €0.92
More

Reference: M31LE7567

SPRING NUT WITH THREAT M31LE7567

SPRING NUT WITH THREAT M31LE7567

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.6
LENGHT (L): 20.4
THREAD: ST4.8
WIDE (b): 15
LENGTH TO DRILL CENTER (c): 10.5
LENGTH TO DRILL CENTER (c): 9
DIAMETRO TALADRO (D): 6
GRUESO (E): 11
CLIPPING THICKNESS (F): 0.5–4.5
TYPE OF FORM: 6
Price €1.56
More

Reference: M31LE7568

SPRING NUT WITH THREAT M31LE7568

SPRING NUT WITH THREAT M31LE7568

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.7
LENGHT (L): 15.7
THREAD: ST5.5
WIDE (b): 14.5
LENGTH TO DRILL CENTER (c): 6.8
LENGTH TO DRILL CENTER (c): 7.5
DIAMETRO TALADRO (D): 8
GRUESO (E): 8.5
CLIPPING THICKNESS (F): 0.6–1.7
TYPE OF FORM: 1
Price €1.06
More

Reference: M31LE7569

SPRING NUT WITH THREAT M31LE7569

SPRING NUT WITH THREAT M31LE7569

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.7
LENGHT (L): 16.7
THREAD: ST5.5
WIDE (b): 14.5
LENGTH TO DRILL CENTER (c): 7.7
LENGTH TO DRILL CENTER (c): 8
DIAMETRO TALADRO (D): 8.7
GRUESO (E): 9.7
CLIPPING THICKNESS (F): 1.5–3.0
TYPE OF FORM: 1
Price €1.20
More

Reference: M31LE7570

SPRING NUT WITH THREAT M31LE7570

SPRING NUT WITH THREAT M31LE7570

FINISHED SURFACE: Galvanizado + Cromado amarillo
THICKNESS (S): 0.8
LENGHT (L): 24.3
THREAD: ST6.3
WIDE (b): 14.5
LENGTH TO DRILL CENTER (c): 12.7
LENGTH TO DRILL CENTER (c): 10.5
DIAMETRO TALADRO (D): 8.7
GRUESO (E): 14
CLIPPING THICKNESS (F): 0.7–2.0
TYPE OF FORM: 1
Price €1.56
More

Reference: M31LE7572

SPRING NUT WITH THREAT M31LE7572

SPRING NUT WITH THREAT M31LE7572

FINISHED SURFACE: Galvanizado + Cromo negro
THICKNESS (S): 0.7
LENGHT (L): 23.7
THREAD: ST6.3
WIDE (b): 16
LENGTH TO DRILL CENTER (c): 10.5
LENGTH TO DRILL CENTER (c): 12
DIAMETRO TALADRO (D): 8.7
GRUESO (E): 14
CLIPPING THICKNESS (F): 3.0–4.0
TYPE OF FORM: 1
Price €1.70
More